Selfie Frames
Printed selfie frames for weddings, parties, launches, fetes and exhibition stands — the hand-held cut-out frame guests hold up for a photo. Printed on foam PVC and cut out here at our Dorset Innovation Park unit, so they are light enough to hold at arm's length all evening but stiff enough to survive being passed round a marquee.
- Printed on rigid foam PVC (Foamex) — 5mm for general event use, 10mm where the frame takes heavy handling or gets used again
- A1 (594 x 841mm) and A0 (841 x 1189mm) outer size
- Full colour one side, aperture cut out ready to use
- Supplied in packs of 1, 2 or 5
- Printed and cut in-house in Dorset
- Free collection from our Winfrith unit, or tracked UK delivery
- Free prepress check on every order
Which thickness? 5mm is the usual choice for a one-off event — light, cheap and perfectly rigid at A1. Go to 10mm if the frame is going to be handed round all day, used across a season of events, or produced at A0, where the extra board keeps the long sides from flexing.
Artwork: please supply a print-ready PDF at the finished outer size plus 3mm bleed, CMYK, 300dpi, with fonts outlined or embedded. Mark the aperture clearly — either draw it as a separate cutter path on its own layer or tell us the size and position and we will set it out for you. Keep your wording and logos at least 20mm clear of both the outer trim and the aperture edge, because the border is where hands go. We have an A1 template on the legacy site if that helps; ask and we will send it over.
Want a shaped frame, a different outer size, a handle, or a matching board for the same event? Give us a ring on 01305 819 879 and we will quote it properly.
Prices shown are per pack and exclude VAT. Selfie frames are standard-rated.
